(A little snow in the picture to alleviate the Florida August heat…)
The initial notification date for the National Emission Standards for Hazardous Air Pollutants (NESHAPs) from boilers at area sources (40 CFR part 63 subpart JJJJJJ) is September 17, 2011. By that date, owners or operators of existing, regulated boilers must complete and submit the Initial Notification of Applicability to the appropriate authority (EPA or State environmental agency).
The rule applies to industrial, institutional and commercial boilers located at “area” sources that burn solid fossil fuels, biomass or liquid fuels – e.g., coal, wood, or oil – if not already regulated under another NESHAP standard. An area source is one with the potential to emit less than 10 tons per year of any one Hazardous Air Pollutant and less than 25 tons per year of total HAPs.
Requirements for work practices or the management standard practice of a tune-up must be met by March 21, 2012. Existing sources subject to emissions limits or an energy assessment requirement must comply by March 21, 2014. Emission standards, applicable to existing coal-fired boilers, include Maximum Achievable Control Technology (MACT) standards for mercury and carbon monoxide and Generally Achievable Control Technology (GACT) limits for particulate matter.
Here’s a general guidance on how to comply: http://www.epa.gov/ttn/atw/boiler/imptools/area_sm_biz_compli_guide_appx.pdf
Here’s more on the boiler MACT rules: http://www.epa.gov/ttn/atw/boiler/boilerpg.html. A copy of the area source rule can be found at http://www.epa.gov/ttn/atw/boiler/fr21mr11a.pdf.